# qbase+, GenEx and REST 2009: what each does best

> qbase+, GenEx and REST 2009 next to Clarida, row by row, and how to check the numbers on a run you reported. Every fact about them dated and linked.

Source: https://clarida.bio/compare/qpcr-software
Updated: 2026-11-10

[Compared with dedicated qPCR software](https://clarida.bio/compare)

qbase+, GenEx and REST 2009 each do the analysis well. Clarida adds the plate before it, and imports your qbase+ workspaces free.

[Start free](https://app.clarida.bio/login) · [Side by side](https://clarida.bio/compare/qpcr-software#side-by-side)

4 [experiments](https://clarida.bio/pricing#whats-an-experiment) in your first month, then 2 a month. No card.

> **experiments**: The runs and analysis behind one scientific question. Counted once, when you create it. Re-analyzing, reporting and exporting are free, with no limit on samples, assays or runs. [How pricing counts experiments](https://clarida.bio/pricing#whats-an-experiment)

- **You keep**: GenEx for PCA and replicate planning
- **You add**: Plate layout and mixes, from your lists

## When is qbase+, GenEx or REST better for you?

Each was written by people who know qPCR, and the methods in them are published.

- **You classify samples on many genes**: GenEx: [PCA, self-organizing maps, clustering and heat maps](https://www.multid.se/software), with NormFinder beside geNorm
- **You plan replicates from a pilot**: GenEx: a [nested ANOVA](https://gene-quantification.de/genex.html) shows how much variance each step adds
- **Your lab works under GxP**: MultiD sells GenEx GxP, an edition for regulated labs
- **You need one quick two-group answer**: REST 2009: [free](https://gene-quantification.de/rest-2009.html), with a randomization test that assumes no normal distribution
- **A qbase+ study must stay unchanged**: Finish it in the install you have; the workspace [imports](https://clarida.bio/qbase-plus/import) when you’re ready
- **You work in R already**: The packages there have [a comparison of their own](https://clarida.bio/compare/scripts)

## Has your analysis outgrown one computer?

- **The analysis lives on one licensed computer.** A colleague waits for it, or does the work again.
- **The plate starts in a spreadsheet.** Layout and volumes are typed again into the cycler: none of the three documents a step that does it, as of October 26, 2026.
- **Your study spans several plates.** REST 2009 takes [one table of Cq values](https://www.qiagen.com/resources/usermanual/rest-2009-software-user-guide-en), with no step between runs.
- **A reviewer asks which settings made a figure.** The project file sat on a laptop that has since been reassigned.
- **It runs on one operating system.** REST 2009 is a Windows program that needs .NET Framework 2.0.

## Side by side

| What you need | qbase+ | GenEx | REST 2009 | Clarida |
| --- | --- | --- | --- | --- |
| Design |  |  |  |  |
| Planning the replicates | **Advice** [Sample maximization](https://web.archive.org/web/20250909165330/https://genorm.cmgg.be/software/qbaseplus_manual_20180924.pdf), three inter-run calibrators, a geNorm pilot first | Stronger: **From a pilot** A [nested ANOVA](https://gene-quantification.de/genex.html) shows the variance each step adds, to plan replicates | **Not documented** Not in the user guide | **You set them** Replicates per reaction, by you or a preset |
| The plate layout | **After the run** Wells named in a run editor; a layout copies to other plates | **Not documented** Not in the product pages | **Per gene** Cq entered per gene, not per well | Stronger: **Generated** By your lab’s rules, in blocks for a multichannel pipette; the free Plate editor writes a QuantStudio or CFX setup file |
| Execute |  |  |  |  |
| Mixes and pipetting | **Not documented** Not in the manual | **Not documented** Not in the product pages | **Not documented** Not in the user guide | Stronger: **Worked out** Each mix with its surplus, then a guide to fill the plate |
| Import |  |  |  |  |
| The run comes in | **Cq tables** From [32 named instruments](https://web.archive.org/web/20250909165330/https://genorm.cmgg.be/software/qbaseplus_manual_20180924.pdf), plus RDML and two generic formats | **Text exports** The [text files](https://gene-quantification.de/genex.html) cyclers export | **Pasted** Cq per gene and group, or Rotor-Gene Q results | **Run files** Four makers’ files with their curves, RDML, or a Cq table; checked against your plate |
| Analyze |  |  |  |  |
| Cq from the raw curves | **Imports Cq** [No raw curves](https://web.archive.org/web/20250909165330/https://genorm.cmgg.be/software/qbaseplus_manual_20180924.pdf) in the manual | **Imports Cq** From instrument export files | **Typed in** Cq [pasted per gene](https://www.qiagen.com/resources/usermanual/rest-2009-software-user-guide-en) | Stronger: **Built in** A curve fit per well by default, a threshold or the second-derivative maximum; the instrument’s Cq kept |
| Efficiency | **Per target** Typed, or from a dilution series, optionally per run, with its error | **Built in** [Efficiency correction](https://www.thermofisher.com/order/catalog/product/A33921) in preprocessing | **Per gene** From a standard curve, or typed; 100% if left empty | **Per target** From your dilution series, pooled over runs, with its error |
| Several reference genes | **Several** Every marked gene combined; global mean and custom factors too | **Built in** Normalization to selected reference genes | **Several** Combined by geometric mean | **Several** Combined by geometric mean, or the global mean |
| Which reference genes are stable | **geNorm** M and V, plus an expert reading of how many genes to use | **Two methods** [geNorm and NormFinder](https://www.multid.se/software) | **Not documented** Not in the user guide | **Two methods** geNorm and NormFinder, side by side in one experiment |
| Several runs | **Calibrators** One or more per gene, applied after normalization, with its error | **Built in** Interplate calibration | **One table** One table of Cq values, no step between runs | **Built in** A run effect fitted across all runs, with its error |
| Error carried to the result | **Built in** Replicates, efficiency, normalization factor and calibration | **Not documented** Not in the product pages | **Intervals** Bootstrap confidence intervals on the ratio | **Built in** From the replicates and the efficiency through to the normalized result |
| Statistics | **Wizard** Guides you to a t-test, ANOVA, rank test, correlation or Cox model | Stronger: **Extensive** Tests with multiple-testing correction, plus PCA, clustering, heat maps and neural networks | **Two groups** Randomization test, no normality assumed | **Common tests** t-tests, ANOVA with post-hoc comparisons, rank-based methods and correlation; adjusted p-values |
| Report |  |  |  |  |
| Results out | **Tables, RDML** Excel and CSV tables, charts as SVG or PDF, [projects in RDML](https://web.archive.org/web/20250909165330/https://genorm.cmgg.be/software/qbaseplus_manual_20180924.pdf) | **Not documented** Export not in the product pages | **Table, plots** Box plots [saved by right-click](https://www.qiagen.com/resources/usermanual/rest-2009-software-user-guide-en) | **Report, Excel, RDML** A PDF or HTML report with each table as CSV; the experiment in your Excel notebook; RDML 1.3 |
| Throughout |  |  |  |  |
| The whole lab in one place | **Per computer** Windows, Mac and Linux; one user per workspace | **Per user** A two-year license key for one user | **Per computer** A Windows program | Stronger: **Shared** One workspace in the browser, with named settings sets the lab shares, on a paid plan |
| A year later | **Your workspace** On your computer, backed up at each upgrade; Clarida imports it | **Not documented** Not in the product pages | **Not documented** Not in the user guide | Stronger: **Frozen** A saved analysis never changes, even after an update; earlier versions of the design and settings can be restored |

marks the stronger tool for that need.

### In short

- **Stronger in GenEx**: Planning the replicates · Statistics
- **Stronger in Clarida**: The plate layout · Mixes and pipetting · Cq from the raw curves · The whole lab in one place · A year later
- **A draw**: The run comes in · Efficiency · Several reference genes · Which reference genes are stable · Several runs · Error carried to the result · Results out

## How do you check it on a reported run?

- **Take a result you have already reported.** Import the run behind it, or the whole qbase+ workspace, which comes in free.
- **Match the settings before the numbers.** Use the same reference genes, efficiencies and calibrators, then compare the normalized quantities rather than the Cq values.
- **Read a difference before trusting either side.** Two causes to rule out first: an efficiency typed in one tool and fitted in the other, and another set of reference genes.

## What can you keep running beside it?

- **Keep in GenEx**: PCA and clustering, on the normalized values in Clarida’s [Excel notebook](https://clarida.bio/qpcr/report#export-eln)
- **Keep in REST 2009**: A quick two-group test, on the notebook’s Cq per well with its sample and target
- **Bring from qbase+**: Whole workspaces, [imported free](https://clarida.bio/qbase-plus/import), never counted toward your plan
- **Look at a reaction elsewhere**: [RDML 1.3](https://clarida.bio/qpcr/report#export-rdml) with the raw curves, for [RDML-Tools](https://www.gear-genomics.com/rdml-tools/help.html) once migrated to 1.4; the file carries no analysis settings

## Frequently asked questions

### Is qbase+ still available?

We found no current download when we checked on October 29, 2026. Bio-Rad’s current CFX Maestro [bulletin](https://www.bio-rad.com/sites/default/files/2026-08/Bulletin_3971.pdf) (August 2026) no longer lists the qbase+ license its [earlier one](https://commerce.bio-rad.com/webroot/web/pdf/lsr/literature/Bulletin_7281.pdf) bundled, and the US VA’s [technical reference](https://www.oit.va.gov/Services/TRM/ToolPage.aspx?tid=9714) calls version 3.2 the most current it knows. If you have a working install, your workspaces [import into Clarida free](https://clarida.bio/qbase-plus/import).

### Does Clarida have NormFinder, like GenEx?

Yes. Clarida rates reference gene stability with [geNorm](https://clarida.bio/tools/genorm) and [NormFinder](https://clarida.bio/tools/normfinder), and you can compare the two in one experiment. NormFinder is checked against its authors’ Excel add-in on their published example; geNorm’s M values match qbase+.

### Do any of these tools plan the experiment?

GenEx helps decide how many replicates to run at which step, from a pilot. The qbase+ [manual](https://web.archive.org/web/20250909165330/https://genorm.cmgg.be/software/qbaseplus_manual_20180924.pdf) advises putting as many samples of a gene as you can in one run, with the same three calibrators on every plate where that is impossible. Laying out a plate or working out a mix is documented for none of the three, as of October 26, 2026. In Clarida you list the samples and assays: it lays out the plate by your lab’s rules, gives every mix with its surplus and guides you through filling the wells. It does not estimate how many replicates you need; GenEx goes further there.

### Is Clarida a GxP edition, like GenEx GxP?

No. Clarida has no electronic signatures or sign-off, and MultiD sells [GenEx GxP](https://www.multid.se/software) as an edition for regulated labs. Clarida stores each setting change, each automatic exclusion and each accepted QC deviation with who and when. A saved analysis is frozen.

### What do these tools cost?

REST 2009 is free. GenEx is licensed per user: Thermo Fisher lists [GenEx Professional v7.0](https://www.thermofisher.com/order/catalog/product/A33921) at €1,430 for a two-year key, and MultiD gives no price for GenEx 8. Clarida’s free plan: 4 experiments in your first month, then 2 a month. No card. Imported qbase+ workspaces never count toward it; the [pricing page](https://clarida.bio/pricing) has the paid plans.

## Sources

Each source with the day we last checked it. Something out of date? [Tell us](https://clarida.bio/talk-to-us?topic=help).

- [Hellemans et al. (2007), qBase, Genome Biology 8:R19](https://doi.org/10.1186/gb-2007-8-2-r19) Efficiency-corrected normalization with several reference genes, inter-run calibration, error carried through Checked October 26, 2026
- [Biogazelle, qbasePLUS manual, version 3.2 (2018; Wayback copy of genorm.cmgg.be)](https://web.archive.org/web/20250909165330/https://genorm.cmgg.be/software/qbaseplus_manual_20180924.pdf) Replicate advice, run editor, imports, efficiency, normalization, geNorm, calibration, statistics, export Checked October 26, 2026
- [Bio-Rad, qbasePLUS for CFX (product page)](https://www.bio-rad.com/webroot/web/html/lsr/products/amplification_pcr/product_overlay/global/qbasec_cfx_touch.html) QC, normalization, inter-run calibration, the statistics wizard, RDML export; no ordering shown Checked October 29, 2026
- [Bio-Rad, CFX Maestro Software, Bulletin 3971 (August 2026)](https://www.bio-rad.com/sites/default/files/2026-08/Bulletin_3971.pdf) The current CFX Maestro editions; no qbase+ license listed Checked October 29, 2026
- [Bio-Rad, CFX Opus systems, Bulletin 7281 (earlier edition)](https://commerce.bio-rad.com/webroot/web/pdf/lsr/literature/Bulletin_7281.pdf) Bundled a license for qbase+ with CFX Maestro 2.0 Checked October 29, 2026
- [US Department of Veterans Affairs, Technical Reference Model: qbase+ (updated January 15, 2026)](https://www.oit.va.gov/Services/TRM/ToolPage.aspx?tid=9714) Version 3.2 "the most current known version"; "no recent development activity" Checked October 29, 2026
- [CellCarta, acquisition of Biogazelle (December 14, 2021)](https://www.newswire.ca/news-releases/cellcarta-acquires-biogazelle-to-strengthen-its-genomic-capabilities-and-expand-into-digital-pcr-dpcr-services-831416322.html) CellCarta acquired Biogazelle; the release does not mention qbase+ Checked October 26, 2026
- [MultiD, GenEx 8 and GenEx GxP](https://www.multid.se/software) geNorm, NormFinder, PCA, self-organizing maps, heat maps; a GxP edition; trial on request, no price Checked October 29, 2026
- [Thermo Fisher, GenEx Professional v7.0 (catalog A33921)](https://www.thermofisher.com/order/catalog/product/A33921) €1,430 for one two-year license key, one user; statistics, PCA and heat maps Checked October 29, 2026
- [Pfaffl, GenEx 7.0 product text (gene-quantification.de)](https://gene-quantification.de/genex.html) A nested ANOVA shows the variance each step adds, to plan replicates; imports the text files cyclers export Checked October 29, 2026
- [QIAGEN, REST 2009 user guide (2009)](https://www.qiagen.com/resources/usermanual/rest-2009-software-user-guide-en) Cq pasted per gene, efficiency, reference genes, randomization test, box plots; Windows and .NET 2.0 Checked October 26, 2026
- [Pfaffl, REST 2009 (gene-quantification.de)](https://gene-quantification.de/rest-2009.html) Free of charge; version 1 of December 22, 2009; a 64-bit patch Checked October 29, 2026
- [RDML consortium, RDML-Tools help](https://www.gear-genomics.com/rdml-tools/help.html) Opens RDML 1.4 for a second look at any reaction; RDML-Edit migrates older files Checked October 26, 2026

Checked November 10, 2026

## Rerun a result you have already reported.

Import the run behind your last qbase+, GenEx or REST 2009 figure and set the numbers side by side. qbase+ workspaces come in free. 4 experiments in your first month, then 2 a month. No card.

[Start free](https://app.clarida.bio/login) · [Talk to a founder](https://clarida.bio/talk-to-us?topic=demo)
