# Your samples on the plate, the way your lab pipettes

> Design a qPCR experiment in Clarida: samples and assays from a spreadsheet or your library, the master mix, a plate laid out for multichannel pipettes, the protocol.

Source: https://clarida.bio/qpcr/design
Updated: 2026-11-02

[Design · step 2 of 6](https://clarida.bio/qpcr)

Bring the sample and assay lists you keep, and leave with a plate you can fill at the bench, its mixes and the cycler’s program.

[Start free](https://app.clarida.bio/login) · [In this step](https://clarida.bio/qpcr/design#in-this-step)

4 [experiments](https://clarida.bio/pricing#whats-an-experiment) in your first month, then 2 a month. No card.

> **experiments**: The runs and analysis behind one scientific question. Counted once, when you create it. Re-analyzing, reporting and exporting are free, with no limit on samples, assays or runs. [How pricing counts experiments](https://clarida.bio/pricing#whats-an-experiment)

1. [Step 1: Define](https://clarida.bio/qpcr/define)
2. Step 2: Design
3. [Step 3: Execute](https://clarida.bio/qpcr/execute)
4. [Step 4: Import](https://clarida.bio/qpcr/import)
5. [Step 5: Analyze](https://clarida.bio/qpcr/analyze)
6. [Step 6: Report](https://clarida.bio/qpcr/report)

- **You start with**: The experiment from Define
- **You end with**: Plate map, mixes and cycling protocol

## The rules that hold

- **Where Clarida decides, it says why.** Left on automatic, the plate layout shows the reason under each rule it picked.
- **A well you change stays as you left it.** After a change by hand the layout stays manual, and Clarida warns before it lays the plate out again.
- **What the bench used is locked.** Once the runs are marked ready, the layout and the mixes lock, so the record can’t drift from what was pipetted.

## In this step

01 In the app: Sample Prep

### Samples from a spreadsheet, a file or your library

Paste your samples from a spreadsheet, read them from a file or a sheet of your notebook, take them from your library, and create the rest: a batch at once, a dilution series of standards from a starting quantity and a factor, one by one. Any extra column you paste becomes a property to group and test by later, such as treatment, time point or donor.

- **Sample types:** unknown, standard, the negative controls (NTC, NAC, no-RT, NTP and a generic one), positive control, optical calibrator
- **Per control:** the Cq range you accept
- **Properties:** text, list, number, date, yes/no

Read the method: [Importing samples and assays](https://clarida.bio/methods/importing-samples-and-assays)

02 In the app: Assay Prep

### Assays, single or multiplex

Add assays the same ways, take a whole panel from your library, or generate up to 1,000 at once. A multiplex assay holds up to six targets, each with its dye and type; pasted rows sharing a name become one, shown to you before it is created.

- **Assay types:** gene of interest, reference gene, positive control, negative control, internal amplification control
- **Dyes:** SYBR, FAM, VIC, HEX, ROX, Cy5, Cy5.5, TAMRA and Texas Red
- **Targets per assay:** one to six

03 In the app: Marker Setup

### Genotyping markers, derived from your assays

For a genotyping experiment, each marker says how its alleles are told apart, and which target or dye carries which. Take markers from your library (the default), derive them from your assays and tidy their names, or enter them by hand, with the locus.

- **Calling method per marker:** ΔCq, end point or melting temperature
- **Expected genotypes:** per marker, for each control sample

Read the method: [Genotyping by allelic discrimination](https://clarida.bio/methods/genotyping-allelic-discrimination)

04 In the app: Mix

### The mix, and how you pipette it

Take the reaction mix from this experiment, your library or the commercial list Clarida keeps by company. Or write the recipe yourself. How you pipette, with an assay mix, a sample mix or in three steps, decides how the plate is blocked and the volumes split. The surplus set here, 10% unless you change it, is carried into every amount at the bench.

- **Mode:** automatic, assisted or manual
- **Pipetting approach:** 2-step with assay mix, 2-step with sample mix, or 3-step pipetting
- **Recipe:** each component fixed, adjusting or scaling with the reaction
- **Units:** µL, % or ×, with the total and the surplus
- **Mix strategy:** per run, shared across runs, or chosen automatically
- **Save:** a mix you made to your library

![Design’s Mix in manual mode: the pipetting approach (2-step with assay mix chosen), the reaction mix taken from this experiment, the library or the commercial list by company (Bio-Rad, Clarida, Roche, Thermo Fisher), and its recipe: mastermix, sample and assay in µL, each fixed, adjusting or scaling, the total and a 10% surplus.](https://clarida.bio/images/qpcr-steps/design-mix.png)

Figure 1: Mix: the recipe from this experiment, your library or a company’s list.

05 In the app: Run Layout

### The plate laid out the way your lab pipettes

Clarida places the samples and assays on the plate by your rules, with replicates side by side for a multichannel pipette. Left on automatic, it picks each rule from the experiment and shows the reason under it. More reactions than fit go onto further plates, whole blocks kept together if you want.

In manual mode, the plate opens in **Edit**: lay out each run as in the free [Plate editor](https://clarida.bio/tools/plate-editor), with undo and redo. **Checks** flag wells with only a sample or only an assay, and assays without a negative control.

- **Mode:** automatic, assisted or manual
- **Plates:** 96 or 384 wells, as many as the experiment needs
- **Block by:** assay or sample
- **Fill order:** down or across
- **Block style:** rectangular or continuous
- **Replicates:** how many per reaction; adjacent, after all others or stacked
- **384 wells:** the quadrant pattern for multichannel pipettes

![Design’s Run Layout in Manual, editing Run 1 of three: a toolbar with Place, Move and Clear, Well, Replicates 2× and Set, Undo and Redo, Display, and Checks with 1 to check; the runs as pills; the list of 22 samples; and a 96-well plate laid out by assay in two outlined blocks, each with standards S1 to S5, a negative control and samples X1 to X16, replicates side by side.](https://clarida.bio/images/qpcr-steps/design-run-layout.png)

Figure 2: Run Layout in Manual: each run edited on the plate, every assay in its own block.

Read the method: [Plate layout generation](https://clarida.bio/methods/plate-layout-algorithm)

06 In the app: Cycling Protocol

### The cycling program, from your library

Take a protocol from this experiment, your library or Clarida’s. Or build one from holds, reads, repeats and a melt curve, in the order you drag them, and save it to your library for the next one.

- **Mode:** automatic, assisted or manual
- **Steps:** hold, hold and read, repeat, melt curve

## Which parts you see

Each kind of experiment opens with the parts it uses.

- **Gene expression, reference genes, detection**: Sample Prep, Assay Prep, Mix, Run Layout and Cycling Protocol
- **Genotyping**: The same, with Marker Setup after Assay Prep
- **Plate homogeneity**: One short form instead: one sample, one assay, the mix, the protocol, the plate and how many wells

## What Design doesn’t do

- **Other plate formats**: 96 and 384 wells only; runs on other plates still import and analyze
- **The cycling program as a file**: Start run shows the program step by step; you enter it in the cycler’s software yourself

## Frequently asked questions

### Can you send the plate layout to your cycler?

Yes: **Instrument file** in Start run downloads each run as a QuantStudio or CFX setup file.

### Does Clarida add the controls?

No, but it warns when one is missing. They are samples and assays with a control type, so they are placed by the same rules and checked later against the Cq range you set.

Updated November 2, 2026

## Paste your sample list.

Start a free experiment, paste your samples and assays, and lay out one plate. 4 experiments in your first month, then 2 a month. No card.

[Start free](https://app.clarida.bio/login) · [Talk to a founder](https://clarida.bio/talk-to-us?topic=demo)
