Skip to content

Free tools

Concentration converter: DNA copies from ng/µL

Enter one amount of your template, as mass, moles or copies, and read the others: in the sample, the reaction and per dPCR partition.

You start withA concentration and your template
You end withMass, moles and copies, λ for dPCR
Type one value and read all the others, in the sample, in the reaction and per partition, for the template you pick.
On this page

How the numbers are worked out

Every conversion goes through the total copies of template in the reaction. Your input is turned into that total, and every other field is worked out from it:

  • Sample concentration = copies ÷ sample volume
  • Reaction concentration = copies ÷ reaction volume
  • Reaction quantity = copies
  • Copies per partition = copies ÷ partition count

For mass, each is multiplied by the mass of one copy; for moles, divided by Avogadro’s number, 6.022 × 10²³ per mol. A weight in daltons uses 1 Da = 1.66 × 10⁻¹² pg. The organism presets use 650 Da per base pair; a calculator set to 660, about 1.5% higher, gives copy numbers about 1.5% lower.

A worked example, with the defaults: human genomic DNA at 10 ng/µL, 2 µL in a 20 µL reaction, on a 20,000-partition platform. One human genome copy (haploid) is 3.35 pg, so:

  • 10 ng/µL × 2 µL = 20 ng in the reaction: 20,000 pg ÷ 3.35 pg = about 5,970 copies.
  • The sample holds 5,970 ÷ 2 µL = about 2,990 copies/µL.
  • The reaction holds 5,970 ÷ 20 µL = about 299 copies/µL, or 1 ng/µL.
  • Per partition: 5,970 ÷ 20,000 = 0.299 copies.

The organism presets, each the mass of one haploid genome copy, with genome sizes rounded:

OrganismGenome sizeMass per copy
Human (Homo sapiens)3.1 × 10⁹ bp3.35 pg
Mouse (Mus musculus)2.7 × 10⁹ bp2.91 pg
Rat (Rattus norvegicus)2.9 × 10⁹ bp3.13 pg
Zebrafish (Danio rerio)1.4 × 10⁹ bp1.51 pg
C. elegans1.0 × 10⁸ bp0.108 pg
Drosophila melanogaster1.4 × 10⁸ bp0.151 pg
Arabidopsis thaliana1.6 × 10⁸ bp0.173 pg
Yeast (Saccharomyces cerevisiae)1.2 × 10⁷ bp0.013 pg
E. coli4.6 × 10⁶ bp0.00497 pg

The digital PCR presets, nominal partition counts per reaction:

MakerPlatformPartitions
Bio-RadQX200 and QX60020,000
Bio-RadQX70017,000
Bio-RadQX Continuum25,000
QiagenQIAcuity, 8.5k and 26k nanoplate8,500 and 26,000
Thermo FisherQuantStudio Absolute Q20,000
StillaNaica17,000
RocheDigital LightCycler, three plates20,000, 28,000, 100,000
FormulatrixConstellation, 24-well and 96-well36,000 and 8,000
JN MedsysClarity Plus40,000

How it works

01In the tool: Concentration converter › Conversion matrix

Type one value, read every other

One table: mass, moles and copies down the side; across, the concentration in the sample and in the reaction, the reaction quantity, and copies per partition. Type in any field and the rest fill in. Click a result to make it your output; double-click it to clear the table and start from it as your input. Scientific notation works (1.5e6), and results keep three significant digits.

  • Mass: pg/µL to µg/µL, pg/mL to mg/mL, µg/L and mg/L; quantities from ag to mg
  • Moles: aM to M; quantities from amol to mol
  • Copies: per µL, mL and L; a quantity in copies
  • Digital PCR: copies per partition, shown as λ

02In the tool: Concentration converter › Template

Tell it what one copy weighs

Pick an organism, or enter a molecular weight. For a plasmid or an amplicon, that is its length in bp × 650 Da: a 3,000 bp plasmid weighs about 1,950 kDa.

  • Default: human, 3.35 pg per copy
  • Custom weight: in pg, fg and ag per copy, Da up to TDa, g/mol and kg/mol

03In the tool: Concentration converter › Platform

Match your volumes and your instrument

The volumes set the step from sample to reaction; the platform sets the partitions a reaction is split into.

  • Sample volume: 2 µL by default
  • Reaction volume: 20 µL by default
  • Platform: a Bio-Rad QX200 with 20,000 partitions by default, any preset above, or a count of your own

04In the tool: Concentration converter › Results

Copy the number you need

Under the table, Results shows your input, the conversion factor and the output, each with a copy button.

What the converter doesn’t do

Take a sequence lengthNot yet: enter the length × 650 Da as a custom weight
Find λ from the positive partitionsNot here: it divides the copies by the partition count, with no Poisson correction, and counts the whole reaction volume as partitioned

Frequently asked questions

Is the concentration converter free?

Yes, with no account, and nothing to install.

How do you convert ng/µL to copies/µL?

Pick your template in the settings, type the ng/µL in the mass row under sample concentration, and read copies/µL in the bottom row. For human genomic DNA, 1 ng holds about 300 genome copies.

Can it convert µM to ng/mL, or nM to µg/mL?

Yes, for any molecule once you enter its weight: pick Custom weight in the settings and give it in g/mol or Da. Then type the molar concentration in the moles row and read the mass row.

Why does another copy number calculator give a slightly different number?

One cause is the mass of a base pair: Clarida’s presets use 650 Da per bp, and a calculator using 660 gives about 1.5% fewer copies.

What do sample volume and reaction volume mean here?

Sample volume is how much of your sample you pipette in; reaction volume is the total in the well. Sample concentration is that of the tube you pipette from, reaction concentration that of the mix it lands in.

Does the molecular weight change the copy number?

It changes every conversion between mass and copies, and between mass and moles. Conversions between copies and moles, between sample and reaction, and to copies per partition do not depend on it.

Cite this tool

Format

Clarida. (2026). Concentration converter (Version 2026.11.0) [Web application]. Retrieved November 18, 2026, from https://app.clarida.bio/concentration-converter

Updated

Work out the copies going into your next reaction.

Type the concentration you measured, and every other unit fills in.

More free tools

All free tools
  • Plate editor

    Plan each well’s sample and assay, then paste the layout into your instrument software.

    You start with
    Sample and assay names, or a run file
    You end with
    A plate layout to copy or export
  • Excel workbooks

    Templates for the qPCR lab, and a tidy-up for your own.

    You start with
    Nothing, or a workbook of your own
    You end with
    A template, or your workbook restyled
  • geNorm reference gene finder

    Rank candidate reference genes by stability, and see how many you need.

    You start with
    Cq (Ct) values of your candidate genes
    You end with
    Ranking, how many genes, PDF by email